Step By Step Guide to Apply Asian Paints Glow Theme Dinosaur (Jurassica)

Step By Step Guide to Apply Asian Paints Glow Theme Jurassica (Dinosaur)

Watch the video for full details:

Follow the steps below to prepare the walls and then apply the Asian Paints Jurassica (Dinosaur) Glow Theme in your  kids room.

Step 1: Rub the walls with water papers (Grade 80)

Step 2: Clean the walls to remove dust particles

Step 3: Apply Oil Primar over the wall with brush

Step 4: Apply first coat of Asian Paints Paste Putty

Step 5: Rub with water paper (Grade 120)

Step 6: Clean the wall to remove dust particles

Step 7: Apply Oil Primar over the wall with brush and sponge roller

Step 8: Rub with water paper (Grade 320)

Note water papers with higher grades are finer and lower grades are coarse

Step 9: Check your walls with light (tube light / rod light / flueroscent light) for smmothness

Step 10: Apply touch up putty to makeup defects, if any.

Step 11: Apply first coating of the color

Apply First Coating of Color

Step 12: After first coating of color dries up apply second coating of color

Apply First Coating of Color

Step 13: After second coating has dried up start applying Glow Theme

Step 14: We will use Jurasica Glow theme as example.

Asian Paints Jurassica (Dinosaur) Glow Theme

Step 15: With the help of adhesive tapes place the stencils on the walls as per Reference Grid

Asian Paints Jurassica Glow Theme Stencils Image

Asian Paints Jurassica Glow Theme Stencils Image

Asian Paints Jurassica Glow Theme Grid Reference

Step 16: Mix the glow paste with fluorescent colors

Step 17: Use a roller to apply the glow mixture over the stencil for those figures which will glow and use ordinary color for non-glowing figures. Note, some of the figures will glow and some figures will not glow.

Step 18: After a few minutes remove the stencil.


Hooray! you have an exciting looking walls

Compiled By: Somjit Bhattacharyya